Various scientific and technological progress allow manufacturers of waterproofing materials to produce products of high quality. The main raw material for production of thermo Technoelast is bitumen, modified polypropylene special form. Consequently, the thermal Technoelast has the flexibility and heat resistance, which allows to use it in a hot climate. The main application Technoelast Terme is located in the building industry. It is used in places where it is necessary to ensure high reliability, it prevents premature failure of such structures as bridges, foundations and tunnels. Using resistant to rotting foundations of fiberglass, polyester or fiberglass markedly increases the strength of products. Laying it done by fusing the substrate with a propane torch. In our country and abroad many scientists are working to improve the quality and protective properties of roofing materials.

Unifleks Vent – produce a new generation, which not only copes with its main functions, but also provides "Breathing" effect. Its structure provides the ability to tap steam and moisture, which is periodically formed on the surface of the roof. At present it is the best solution in the fight against dampness. We are accustomed to the fact that replacement roof covering is usually troublesome, but not now. Modern achievements in this area have greatly reduced the complexity of the process. The downside Unifleks Vent has a special adhesive coating, provides a partial fixation of the material on the ground. This allows for all the work quickly and at this very carefully.

It sometimes happens that the roofing material loses its integrity only partially. In It is better suited remaining bipole. With it you can easily and accurately, "patch" the old coating. Remedial works are carried out simply by fusing the material with open flames. Bipole also used when necessary to organize a new roof carpet. Its formation is carried out only under the condition that the ground was pre-Primary coated or has a cement-sand screed. Bipole has waterproof and resistant to significant heating during the summer season. In this case, the material does not fade under the sunlight, keeping their original appeal for many years.

Polypropylene fittings are indispensable for changing the direction of piping, as bend PPR-pipes are not allowed. ppr pipes are connected by polypropylene fitting method of contact thermal welding or by using the combined fitting with metal thread inserts. The advantage of the second option is that the combined polypropylene fittings can receive detachable connections. For plumbing and heating systems are designed pipes, reinforced aluminum foil, as foil prevents deformation of the pipe under the influence of heat. In addition, most plastic products are permeable to oxygen and the presence of a solid aluminum foil prevents his penetration.

Polypropylene pipes and polypropylene fittings are resistant to corrosion and to low temperatures – the freezing of liquid polypropylene tubes do not collapse, but only increased in diameter. The most important characteristic of polypropylene pipes and fittings of polypropylene is also resistance to high temperatures, so they are used in heating systems. PPR-pipes and fittings are very economical material, because the installation is virtually no waste. The very process of installation does not require much effort and is 2-3 times faster than the installation of steel pipes, as the PPR-pipes much easier. This not only reduces the complexity of installation works, but also facilitates the transport of pipes.

Thus, maximum reliability, practicality and durability of polypropylene pipe and polypropylene fittings provide: – Resistance to chemicals and corrosion – Lack of flora for the emergence of bacteria – an obstacle for lime because of the smooth inner surface; – 70% probability savings and no waste during installation PPR-pipes – Lightweight and ease of installation and transportation; – Low thermal conductivity and heat savings – No electrical conductivity – Acoustic Insulation – Save color and shape of PPR-pipes and fittings for the entire life cycle. So , the polypropylene tubes and polypropylene fittings for most physical and technical characteristics and consumer characteristics are far superior pipe materials traditionally used for systems water supply, heating and sanitation. The range of construction and repair organizations, polypropylene and metal pipes occupy the first place, leaving behind even the copper pipes and sent to deserved rest of our ancestors – plastic and steel pipes. With regard to the replacement of pipes, then, of course, do not do it myself, at first glance it seems that the solder pipe is very simple, yes, but only to the master. Must ask for help not to the nearest housing office, and pick a team, perhaps on the advice of clients, neighbors can to help you determine the type of pipes, to advise you and make the quality that much important, with a guarantee! FD-Alliance for you!